How to arrange the lights at fixed points when installing the courtyard lights?

Update:01 Nov 2019

The following three ways of light distribution can be a […]

The following three ways of light distribution can be adopted for the installation of courtyard lights: single side light distribution, cross light distribution on both sides, and symmetrical light distribution on both sides. Landscape lights use different shapes, different light colors and brightness to create scenery. For example, the red lantern shaped landscape lights bring a festive atmosphere to the square, and the green coconut lights create a tropical style by the pool.
If the width of the road is not more than 5 meters, it is enough for the courtyard lamp to use the method of single side lighting. When the width of road lighting is 5-0m, it is recommended to use the method of cross light distribution on both sides for electrical installation. When the width of road lighting exceeds 0m, the method of relative balance light distribution on both sides should be used for installation.
At the T-junction, a lamp can be arranged at the T-junction near the triangle, and at least two lamps can be arranged at the junction near the intersection for lighting. The garden lamp factory furniture has the diversity, the esthetic has the beautification and the decoration environment characteristic, therefore also is called the landscape garden lamp. It is mainly used in urban slow lane, narrow lane, residential area and tourist attraction.


Generally, there is a monitoring camera at the intersection, which needs to be photographed clearly. It is a good choice to arrange according to the shooting requirements. One of the outdoor lighting lamps of courtyard lamp manufacturers, usually refers to the outdoor road lighting lamps below 6 meters. Its main components are: light source, lamp, lamp pole, flange plate and foundation embedded parts. In the corner, solar garden lights are usually arranged outside to prevent the traffic from hitting the poles.

Any method of light distribution must achieve the installation effect and play the role of energy-saving greening. In some places, the lighting requirements are not high, so the lighting time can be reduced. In some areas, the whole night lighting is required, so the street lamp manufacturers need to configure high parameter solar garden lamps.


After the selection of solar garden lamp modeling style, according to the environment near the site to choose the appropriate style, mainly to coordinate the environment.