1, try to use the series LED form, because the LED floo […]
1, try to use the series LED form, because the LED floodlight voltage difference is special. The peak current of a common LED is maintained at 80 mA, and the reverse voltage is at or above 6 V. In LED applications, attention should be paid to the peak voltage and current at which the circuit is designed.
2, the use of voltage below 25 watts when soldering, soldering iron temperature control below 300 degrees Celsius exposed SMD LED at high temperature, do not squeeze its epoxy part, or wipe with a sharp hard object, because LED lamps are very fragile Very easy to damage, welding time is 3 seconds.
LED floodlights are widely used, so the installation tips and precautions are very important. LED is a new light source. Under the correct installation mode, it can ensure the stable operation of LED floodlights for a long time.